- 12G-SDI I/O
- 1G and 2.5G support over RJ45
- Transmit or Receive IP signals from a single device
- Standardized Discovery and Routing – based on AMWA NMOS IS-04 and IS-05 specifications
- Fanless design for quiet cooling
- Power redundancy through PoE+ and locking AC power connector (optional power supply cable sold separately)
- Compact form factor mounts easily to the back of a monitor
- Web-based user interface for managing ConvertIP devices
- Complimentary ConvertIP Manager Windows application for simple commission and deployment
| Product | |
| Part number | CIP-SRS |
| Form factor | Standalone appliance Rack mountable: 1U, 1/3 rack (horizontal) |
| Connectivity | |
| Video input | TX mode: 12G SDI RX mode: No input |
| Video output | TX mode: No output RX mode: 12G SDI |
| Video resolution | HD and 4K resolutions (including broadcast) |
| Genlock | No |
| VANC ancillary data processing | Yes1 |
| Audio input/output | Up to 16 channels of audio embedded in SDI output signal |
| Network connector | 1x RJ45 LAN port for Media and Control with PoE+ (1/2.5G) |
| RS-232 | No |
| Control and management | Matrox ConvertIP Command Center (web UI) Matrox ConvertIP Manager (software application) |
| Performance | |
| Maximum video resolutions | 4096 x 2160 60p |
| Bit depth and color space | YCbCr 4:2:2 10-bit SDR/HDR1 |
| Video and Audio Processing | |
| Video scaling | High Quality multi-tap 10-bit Up/Down Scaler |
| Video deinterlacing | Yes1 |
| Color space conversion | Yes |
| HDCP support | Not applicable |
| Encoding Formats | |
| Video2 | Default compressed bitrates: 200 Mbps for HD content, 820 Mbps for 4K content Colibri codec included 4:2:2 10-bit YUV and 4:4:4 8-bit RGB. 100 to 2000 Mbps JPEG-XS codec upgrade required3 4:2:2 10-bit YUV and 4:4:4 8-bit RGB. 100 to 2000 Mbps |
| Audio | Uncompressed PCM (~1 Mbps/ch) |
| Latency | Less than a 1/4 frame (<4 ms) |
| Network | |
| Network standard | RJ45 providing 1 GbE or 2.5 GbE Base-T Ethernet |
| IP addressing | IPv4 IPv61 DHCP (default) and static IP |
| Supported protocols | SMPTE ST 2110 (-10, -22, -30, -401) SMPTE 2059 (-1, -2) IPMX ready |
| Redundancy | No |
| Command and control | HTTPS over TCP |
| Discovery, registration and control | NMOS discovery and control according to standards IS-04 v 1.2 and 1.3 and IS-05 1.0 and 1.1 |
| PoE+ | Yes (IEEE 802.3at Type 2) |
| Physical | |
| Product dimensions | 7.88 (D) x 5.5 (W) x 1.39 (H) inches 200 (D) x 138 (W) x 35 (H) mm |
| Unit weight | 1.09 lbs / 495 g |
| Cooling | Fanless |
| Power | Device: Input: 12 volts, max 18 Watts PoE+ Optional PSU (sold separately) Line Voltage: 100-240 V a.c., 0.5A Frequency: 50-60 Hz Input: IEC320-C14 Output: DIN4 locking power connector |
| Hardware and Software | |
| Hardware included | ConvertIP SRS appliance |
| Optional hardware | ConductIP NMOS-based routing solution (Part #: CDCTIP-MRA) |
| Accessories (sold separately) | ConvertIP power supply unit (Part #: EPS40WKIT-NA, EPS40WKIT-EU, EPS40WKIT-UK, EPS40WKIT-AU, EPS40W-10PK)4 Rackmount kit (Part #: RMK-19TR-A)5 Angled bracket kit (Part #: RMK-6BRKT-A) NRG redundant power supply unit (Part #: NRG-5-1DB or NRG-5-2DB) |
| Optional software | JPEG-XS codec license Crestron Module to expand existing controlled environments |
| Environmental | |
| Operating conditions | Temperature: 0 to 45 degrees Celsius Altitude: 650 hPa (3,580 m) to 1,013 hPa (0 m) Humidity: 20% to 80% non-condensing |
| Storage conditions | Temperature: -40 to 70 degrees Celsius Altitude: 192 hPa (12,000 m) to 1,020 hPa (-50 m) Humidity: 5% to 95% non-condensing |
| General | |
| EMC/EMI device class | Class A |
| EMC/EMI compliance | CE (EU) FCC (USA) ICES-003 (Canada) KC (Korea) RCM (Aus/NZ) |
| Environmental compliance | China RoHS EU RoHS REACH |
| Warranty | Three-year limited warranty with free online or telephone support |
